--- title: "Setting up an email server in 2020 with OpenSMTPD and Dovecot: extras" firstLetter: "S" publishDate: 2020-04-28 date: 2021-02-22T17:19:49+01:00 draft: false --- # This sequel to my post "[Setting up an email server in 2020 with OpenSMTPD and Dovecot](/blog/2020/email-server/)" gives extra tips and tricks to extend your email setup. See also the sequel's sequel, "[Revisiting my email server in 2022](/blog/2022/email-server-revisited/)". Last updated on 2022-09-12. ## General ### Multiple domains You can generalize your setup to handle multiple domains with very little effort. In the following, I'll assume that your two domains are called `foo.com` and `bar.com`. #### DNS records There should be MX, SPF, DKIM and DMARC records for both domains, as explained in the previous guide. Fortunately, these records can have identical contents for both domains! However, it remains essential that the mail server's mailname and reverse DNS domain name match up exactly, so you should create MX records with that in mind. Therefore, if the email server for both domains has `mx1.foo.com` as reverse DNS name, the MX records should look like this: ```sh foo.com. MX 42 mx1.foo.com. bar.com. MX 42 mx1.foo.com. ``` This is perfectly valid: the only thing that matters is that what your SMTP server calls itself agrees with what reverse DNS says that the server is actually called. #### Dovecot To make Dovecot aware of multiple domains, you only need to update the `/etc/dovecot/users` file to add accounts for both domains. However, in the original guide, I said to only write `user` in the file, without the `@foo.com`, for an address `user@foo.com`. Unsurprisingly, that isn't an option for multiple domains, so you must put the full address in `/etc/dovecot/users`. Then update `/etc/dovecot/dovecot.conf` to reflect that, by changing `%n` to `%u` in `username_format`: ```sh userdb { driver = passwd-file args = username_format=%u /etc/dovecot/users override_fields = uid=vmail gid=vmail home=/home/vmail/%d/%n } ``` Also note the change in the `home` setting: the inbox of a user `user@foo.com` will now be stored in `/home/vmail/foo.com/user`. That's all you need to change. #### OpenSMTPD To inform OpenSMTPD of all the domains, create a new file `/etc/smtpd/domains`, and in there put all desired names on their own line: ```sh foo.com bar.com ``` And as I mentioned when discussing the DNS records, you should check that `/etc/smtpd/mailname` agrees with your server's reverse DNS. Then, in the main configuration file, tell OpenSMTPD to use the new domains file when deciding whether to accept an message, by declaring a new table and changing the `match` line for inbound mail: ```sh table domains "/etc/smtpd/domains" # ... match from any for domain action "RECV" ``` #### Rspamd The last thing to do is to inform Rspamd of the multiple domains. It's really easy: simply add multiple domain blocks: ```c domain { foo.com { path = "/path/to/dkim/private.key"; selector = "hello"; } } domain { bar.com { path = "/path/to/dkim/private.key"; selector = "world"; } } ``` ### Advanced security SPF, DKIM and DMARC are email's traditional DNS-based security systems, but in 2018 the IETF released [RFC 8460](https://tools.ietf.org/html/rfc8460) and [RFC 8461](https://www.rfc-editor.org/rfc/rfc8461.txt), which respectively define TLSRPT and MTA-STS, two fancy new systems focused on TLS-encrypted email transport. These security mechanisms are pretty new, so you won't get a huge benefit from enabling them, but big email providers' draconian spam filters might like it. #### TLSRPT TLS reporting, or TLSRPT for short, is very simple: all it does is provide a contact email address in case somebody has trouble with the TLS configuration of your SMTP server. To enable it for your custom email domain `example.com`, simply create a DNS TXT record for the `_smtp._tls` subdomain: ```sh _smtp._tls.example.com. TXT "v=TLSRPTv1; rua=mailto:" ``` Where `` is an email address of your choosing. That's all! #### MTA-STS MTA Strict Transport Security (MTA-STS) tells other servers that you take TLS encryption of messages very seriously, so they should avoid sending you unencrypted email, and should only accept certain certificates from your side. Compared to the previously discussed DNS-based security extensions, MTA-STS is a bit more work to set up, because you'll also need an HTTP web server. The DNS part is still pretty simple: create yet another DNS TXT record, this time for the subdomain `_mta-sts`: ```sh _mta-sts.example.com. TXT "v=STSv1; id=" ``` The `` should identify the version of your policy, so other servers can quickly see if something changed. I recommend using today's date. For the next part, I'll assume that you already have a web server running on a server with the IP address `1.2.3.4`. I use [nginx](https://nginx.org/) for this, running on the same server as OpenSMTPD and Dovecot, but you don't have to do the same. Create an A record which binds your server to the subdomain `mta-sts` (without underscore): ```sh mta-sts.example.com. A 1.2.3.4 ``` Set your web server to serve the file `https://mta-sts.example.com/.well-known/mta-sts.txt` (we'll discuss that file in a moment). Note that this policy file **must** be served over HTTPS, so you need a valid TLS certificate for that domain. The contents of the `mta-sts.txt` policy file are as follows, where `mx1.example.com` and `mx2.example.com` are the hosts mentioned in `example.com`'s DNS MX records: ```sh version: STSv1 mode: enforce mx: mx1.example.com mx: mx2.example.com max_age: ``` All MX servers must be mentioned this way. If you're feeling cautious, you may want to set `mode` to `testing` in the beginning. This policy is valid for `` seconds, which is recommended to be several weeks, but to start with, I suggest using 86400 seconds (one day). Finally, ensure that this file has CRLF Windows-style line endings. To correctly pass an MTA-STS test, the TLS certificate presented by e.g. `mx1.example.com` should be valid for `mx1.exaple.com`. To achieve this without needing to manage too many certificates, you can specify multiple domains when requesting a certificate, or you can use a wildcard domain (`*.example.com`). Note, however, that MTA-STS testing tools don't like the latter option, so I recommend the former. Once you're done, check your work by using either [ESMTP](https://esmtp.email/tools/mta-sts/)'s or [Ayke](https://aykevl.nl/apps/mta-sts/)'s online MTA-STS validation tools, ignoring any warnings about DNSSEC or DANE. If all is good, great! Even if you did everything correctly, these tools will warn you that you're not using DNSSEC/DANE. It might then be tempting to set that up for even more security, but I recommend against that for private servers: take a look at [this](https://dane.sys4.de/common_mistakes). ## OpenSMTPD ### Client certificates (in addition to passwords) You can configure OpenSMTPD to request a client certificate for sending emails, as a second factor for authentication. UPDATE: When I wrote this two years ago, it worked, but now it doesn't anymore, and I can't figure out why. It seems OpenSMTPD always rejects the client certificates for being self-signed, even if they can manually be verified for our CA using the `openssl` tool. I'm leaving this tutorial here for anyone who's interested, but it's unlikely I'll fix it anytime soon. #### Certificates We need to start with some cryptography to create and verify certificates. I recommend that you do all of this on your trusted *client* device, and only copy the necessary files to the server later. DISCLAIMER: All the keys and certificates that we'll generate in this section are for **private use** only, to handle a small number of trusted clients. I'm not a cryptography expert, so you should **not** listen to me for large-scale systems that may involve untrusted devices. The first step is to set up a private Certificate Authority (CA), which issues the client certificates and can be used to verify them. Start by generating an RSA private key, which you should store in a safe place and not share with anyone: ```sh $ openssl genrsa -out mailca.key 2048 ``` Extract a public certificate from this key as follows. Because we're lazy, we give it a lifetime of 36500 days: ```sh $ openssl req -new -x509 -days 36500 -key mailca.key -out mailca.crt ``` When running this command, OpenSSL will ask you some questions about who this certificate is intended for. Since this is for personal use, your answers don't matter, so just use the defaults. Some fields (I think only *Country Name* and *Organization Name*) cannot be empty, but the others can. Moving on to the client, once again generate an RSA private key: ```sh $ openssl genrsa -out mailclient.key 2048 ``` From this private key, create a Certificate Signing Request (CSR) as follows, where you'll be asked the same questions as before: ```sh $ openssl req -new -key mailclient.key -out mailclient.csr ``` By feeding this CSR to the CA, we can create a signed client certificate that can be verified using the CA's public certificate. ```sh $ openssl x509 -req -in mailclient.csr -out mailclient.crt \ -days 36499 -CA mailca.crt -CAkey mailca.key ``` If you want to multiple client certificates, just repeat the last few steps for each one. #### Server OpenSMTPD needs to verify the validity of client certificates using the CA's public certificate, so you should copy that to somewhere on the server, e.g. `/etc/smtpd/mailca.crt`, and declare it to OpenSMTPD by adding this near the top of `/etc/smtpd/smtpd.conf`: ```sh ca "mailca" cert "/etc/smtpd/mailca.crt" ``` Then replace the entire configuration for outbound mail as follows. Note that this removes SMTPS support, leaving only STARTTLS: ```sh # Outbound listen on eth0 port 587 tls-require verify pki "example.com" ca "mailca" auth filter "rspamd" action "SEND" relay srs match from any auth for any action "SEND" ``` The magic word here is "`verify`", which tells OpenSMTPD to ask for a client certificate and to verify it using the given CA. #### Client Now you won't be able to send emails if your client doesn't present its certificate to the server! Unfortunately, not all mail clients support this; personally I use [Thunderbird](https://www.thunderbird.net/) with success. I won't include any client-specific configuration here, but I will say this: For some clients (like Thunderbird), you'll have an easier time importing your client certificate if you encode it in the [PKCS #12](https://en.wikipedia.org/wiki/PKCS_12) storage format: ```sh $ openssl pkcs12 -export -in mailclient.crt -inkey mailclient.key \ -certfile mailca.crt -out mailclient.pfx ``` OpenSSL will ask you to set a password, which you'll need to enter again when importing the certificate into the client. ### ~~Client certificates (instead of passwords)~~ UPDATE: Don't do this. As said above, OpenSMTPD's certificate verification is a mystery, so for all I know, if you follow the instructions in this subsection, you might find yourself running an *open* SMTP relay! That would be bad, because anyone on the Internet could send emails through your server with zero authentication. In theory, the client certificates act as authentication, but, again, the verification process is mysterious, so I'm just not confident enough to say. If you really want to, you can use the client certificates as a substitute for passwords. This is especially useful if you set up a catchall inbox in Dovecot, because this will allow you to send emails from arbitrary addresses from your domain. To do this, follow the same procedure as in the previous section, but with a slightly different OpenSMTPD configuration: ```sh listen on eth0 port 587 tls-require verify pki "example.com" ca "mailca" filter "rspamd" tag "VALID" action "SEND" relay srs match from any tag "VALID" for any action "SEND" ``` All incoming connections that present a good certificate will be tagged as being `VALID`, and their mail will be relayed. Unfortunately, we're not quite done yet here, because Rspamd is now very confused... #### Rspamd When OpenSMTPD passes a message through Rspamd, it also includes some metadata, most notably whether the sender has authenticated successfully with OpenSMTPD... which is now no longer the case for submissions, because we've removed the `auth` directive! Rspamd therefore starts regarding these outgoing emails as *incoming* emails, because they don't seem to come from a trusted user. So instead of signing them with DKIM and handing them back to OpenSMTPD, it will do a full spam scan. If they get a high spam score (which is likely for short test emails), *your* spam filter, running on *your* server, will be flagging *your* messages as spam! The solution is to whitelist your domain(s) in Rspamd, so it won't scan them. To do this, create a new file `/etc/rspamd/local.d/settings.conf` with these contents, where `foo.com` and `bar.com` are the domains to whitelist: ```c outbound { priority = high; from = "@foo.com"; from = "@bar.com"; apply { actions { add_header = 1000; } } } ``` Setting `priority` to `high` ensures that Rspamd checks this rule before doing anything else. You can add any number of `from` directives; this rule will be applied if any of them match. It only sets the threshold for the action `add_header` to `1000`. That is, if the email doesn't get a spam score of at least 1000 (the default is 6) Rspamd will not add any spam tags. Because Rspamd is still regarding your emails as inbound, you also need to change the global settings of the DKIM signer in `/etc/rspamd/local.d/dkim_signing.conf`, such that they include the following: ```c sign_inbound = true; allow_hdrfrom_mismatch = true; allow_username_mismatch = true; ``` This tells Rspamd to add DKIM signatures to incoming emails, which in this case includes yours. Allowing these mismatches ensures that the messages still get signed, even if you're sending from an arbitrary address. ## Dovecot ### Catchall inbox In Dovecot, you can create a catch-all inbox that will accept all emails sent to your domain that don't match anyone in `/etc/dovecot/users`. Just add another `userdb` block *after* the first: ```sh userdb { driver = static args = uid=vmail gid=vmail home=/var/vmail/catchall allow_all_users=yes } ``` The `static` driver means there is no table file: all configuration is directly within this `userdb` block. If we don't specify `allow_all_users=yes`, then Dovecot will check whether users exist using the `passdb` table, and will conclude that the recipient is invalid.